An Adaptive-Control Switching Buck Regulator-Implementation, Analysis, and Design

Describing-function techniques and averaging methods have been employed to characterize a multiloop switching buck regulator by three functionsl blocks: power stage, analog signal processor, and pulse modulator. The model is employed. to explore possible forms of pole-zero cancellation and the adaptive nature of the control to filter parameter changes. Analysis-based design guide lines are provided including a suggested additional RC-compensation loop to optimize regulator performances such as stability, audiosusceptibility, output impedance, and load transient response.     

Autonomous Upgrading of Inertial Navigation Systems

The performance of substandard inertial platform gyros can be improved through the sampled supervision of their operation by a higher grade gyroscope mounted directly on the platform. The relative drift rates of the susbstandard platform gyros are estimated on a cyclical basis. This paper describes techniques for estimating the drift rates. It deals with the method of applying these estimated values in the form of platform correction signals.     

Long-term changes in indices of geomagnetic activity at the auroral station Sodankylä

Here we compare the traditional analog measure of geomagnetic activity, Ak, with the more recent digital indices of IHV and Ah based on hourly mean data, and their derivatives at the auroral station Sodankylä. By this selection of indices we study the effects of (i) analog vs. digital technique, and (ii) full local-time vs. local night-time coverage on quantifying local geomagnetic activity. We find that all other indices are stronger than Ak during the low-activity cycles 15–16 suggesting an excess of very low scalings in Ak at this time. The full-day indices consistently depict stronger correlation with the interplanetary magnetic field strength, while the night-time indices have higher correlation with solar wind speed. The Ak index correlates better with the digital indices of full-day coverage than with any night-time index. However, Ak depicts somewhat higher activity levels than the digital full-day indices in the declining phase of the solar cycle, indicating that, due to their different sampling rates, the latter indices are less sensitive to high-frequency variations driven by the Alfvén waves in high-speed streams. On the other hand, the night-time indices have an even stronger response to solar wind speed than Ak. The results strongly indicate that at auroral latitudes, geomagnetic indices with different local time coverage reflect different current systems, which, by an appropriate choice of indices, allows studying the century-scale dynamics of these currents separately.     

Effects of Hybrid Voltages on Oxide Formation on 6061 Al-alloys During Plasma Electrolytic Oxidation

Plasma electrolytic oxidation (PEO) is carried out on 6061 Al-alloys in a weak alkaline electrolyte containing NaOH, Na₂SiO₃ and NaCl. Centered on the correlation of composition and structure, analyses by means of X-ray diffration (XRD), scanning electron microscope (SEM) and energy dispersive spectrometry (EDS) are conducted on the specimens, which have been PEO-treated under hybrid voltages of different direct current (DC) values (140-280 V) with constant alternate current (AC) amplitude (200 V). Attention is paid to the composition, properties and growth mechanism of oxide layers formed with hybrid voltages. Moreover, the main effects of DC value are discussed. Ceramic layers with a double-layer structure which combines hard outer and soft inner layers are found to be consist of α-Al₂O₃, γ-Al₂O₃ and mullite. With the DC values increasing, the growth of the ceramic layers tends to have increasingly obvious three-stage feature.     

CREAM: 70 days of flight from 2 launches in Antarctica

The Cosmic-Ray Energetics And Mass balloon-borne experiment has been launched twice in Antarctica, first in December 2004 and again in December 2005. It circumnavigated the South Pole three times during the first flight, which set a flight duration record of 42 days. A cumulative duration of 70 days within 13 months was achieved when the second flight completed 28 days during two circumnavigations of the Pole on 13 January 2006. Both the science instrument and support systems functioned extremely well, and a total 117 GB of data including 67 million science events were collected during these two flights. Preliminary analysis indicates that the data extend well above 100 TeV and follow reasonable power laws. The payload recovered from the first flight has been refurbished for the third flight in 2007, whereas the payload from the second flight is being refurbished to be ready for the fourth flight in 2008. Each flight will extend the reach of precise cosmic-ray composition measurements to energies not previously possible.     

Control system design of the Korean lunar lander demonstrator

In preparation for the lunar exploration program scheduled to be launched during the early 2020s in Korea, a lunar lander demonstrator, which will be used for developing and demonstrating lunar landing technologies, is being developed. The control configuration of the lunar lander demonstrator is determined with the consideration of available technologies and flight requirements. It is suggested that altitude control be achieved by clustering five 200 N monopropellant thrusters and attitude control with eight 3 N thrusters. A control algorithm designed to follow a predefined trajectory is developed using quaternion feedback. Control system configuration and control logic are verified by using computer simulations. Simulation results show that a soft landing with a touchdown velocity of less than 3 m/s is achieved. Attitude control performance is also verified using computer simulations. The developed control configuration will be further tested by hardware in the loop simulations and ground based firing tests during the next phase of the study.     

Time variations of cosmic-ray helium isotopes with BESS-Polar I

The Balloon-borne Experiment with a Superconducting Spectrometer (BESS) is configured with a solenoidal superconducting magnet and a suite of precision particle detectors, including time-of-flight hodoscopes based on plastic scintillators, a silica-aerogel Cherenkov detector, and a high resolution tracking system with a central jet-type drift chamber. The charges of incident particles are determined from energy losses in the scintillators. Their magnetic rigidities (momentum/charge) are measured by reconstructing each particle trajectory in the magnetic field, and their velocities are obtained by using the time-of-flight system. Together, these measurements can accurately identify helium isotopes among the incoming cosmic-ray helium nuclei up to energies in the GeV per nucleon region. The BESS-Polar I instrument flew for 8.5 days over Antarctica from December 13th to December 21st, 2004. Its long-duration flight and large geometric acceptance allow the time variations of isotopic fluxes to be studied for the first time. The time variations of helium isotope fluxes are presented here for rigidities from 1.2 to 2.5 GV and results are compared to previously reported proton data and neutron monitor data.     

The Improvement of a Low-Cost Inertial Navigator Through Conditional Feedback

A concept for providing an accurate low-cost inertial reference was presented in a previous paper. Low-cost platform gyros, poor in terms of their drift rates, furnish the space-fixed reference frame. A single high-accuracy gyro, mounted on the platform, monitors the performance of the platform gyros. Consequently, drift rates are estimated, predicted, and applied as signals to correct the platform for gyro uncertainties. This paper features new estimation and predictive techniques.     

Accuracy Limitations of Hyperbolic Multilateration Systems

A recently developed procedure [1] for assessing the accuracy of hyperbolic multilateration systems makes it easy to determine basic limitations on accuracy. This paper illustrates how such bounds can be derived. The results include bounds for a variety of geometries that are representative of practical ground-based and satellite-based hyperbolic systems. The results are applicable whenever the ranging errors can be treated as uncorrelated zeromean random variables. In some cases the bounds quantify general knowledge (e. g., the directional dependence of errors). In other cases the bounds represent entirely new limitations (e. g., optimum accuracies for sector-restricted and cone-restricted transmitter/receiver configurations).